Onshore wind turbine inspection worksheet

Blank recording aid • version 4 November 2026 • derived from the Gridinta onshore inspection checklist. For competent personnel working to an agreed scope and approved procedures. This is not a work instruction, certificate, acceptance criterion or release-to-service authority.

Download, open in a browser, click a blank field and type. Save a completed copy to retain entries; closing an unsaved file loses changes. Printing is landscape.

Asset, scope and record control

Before recording findings: confirm the project safety and access gate separately. Choose the method and extent from the agreed scope. State “not inspected”, “inaccessible” or “not applicable” with a reason where needed; a blank cell never means “passed”. No severity scale is supplied: record the project’s authorised basis or mark severity pending review.

Coverage key

1 rotor/hub/pitch • 2 nacelle/yaw/auxiliaries • 3 drivetrain • 4 tower/foundation/site • 5 electrical/controls/LPS. Systems overlap; identify the physical location as well as the group. Repeat this worksheet or add a referenced report for additional defects.

1. Blades, hub and pitch

Component / itemMethod / procedure refCoverage achieved / limitsFinding / severity basisEvidence / photo refFollow-up / owner / due date
Blade surfaces and previous repairs

Blade ID, span/chord location, viewing method and extent

Lightning receptors / blade bonding

Visible coverage and test-report reference if in agreed scope

Hub, pitch bearings and drives

Interfaces, feedback, lubrication and visible coverage

Additional item / location

Preserve original evidence separately. Image / sample references must resolve to the project record. Do not infer a healthy hidden area from a normal result elsewhere.

2. Nacelle, yaw and auxiliaries

Component / itemMethod / procedure refCoverage achieved / limitsFinding / severity basisEvidence / photo refFollow-up / owner / due date
Enclosure, drains, bedplate and frame

Ingress, corrosion and structural interfaces covered

Yaw bearing, drives, brakes and cabling

Agreed inspection scope and accessible coverage

Cooling, hydraulic and safety/access equipment

System boundaries; specialist statutory reports remain separate

Additional item / location

Preserve original evidence separately. Image / sample references must resolve to the project record. Do not infer a healthy hidden area from a normal result elsewhere.

3. Drivetrain, gearbox and generator

Component / itemMethod / procedure refCoverage achieved / limitsFinding / severity basisEvidence / photo refFollow-up / owner / due date
Main bearing, shaft, couplings and brake

Component identity and accessible coverage

Gearbox lubrication, filters and oil history

Sample ID/date, operating context and laboratory report

Gearbox internal surfaces if scoped

Entry point, component location, image references and unseen areas

Generator and associated systems

Configuration, cooling and agreed specialist checks

Additional item / location

Preserve original evidence separately. Image / sample references must resolve to the project record. Do not infer a healthy hidden area from a normal result elsewhere.

4. Tower, foundation and site

Component / itemMethod / procedure refCoverage achieved / limitsFinding / severity basisEvidence / photo refFollow-up / owner / due date
Tower shell, welds, flanges and coating

Elevation/orientation and extent; specialist NDT reference if scoped

Bolted joints and foundation anchors

Joint ID, applicable procedure and measurement report

Foundation, drainage and site access

Located observations, concrete/interface and access coverage

Additional item / location

Preserve original evidence separately. Image / sample references must resolve to the project record. Do not infer a healthy hidden area from a normal result elsewhere.

5. Electrical, controls and lightning protection

Component / itemMethod / procedure refCoverage achieved / limitsFinding / severity basisEvidence / photo refFollow-up / owner / due date
Cabinets, cabling, earthing and bonding

Equipment identity and agreed qualified assessment

Converter, transformer and protection interfaces

Boundary of inspection and specialist report reference

Controls, safety functions and LPS tests if scoped

Approved test-plan reference and actual coverage

Additional item / location

Preserve original evidence separately. Image / sample references must resolve to the project record. Do not infer a healthy hidden area from a normal result elsewhere.

Closeout and outstanding decisions

Uninspected areas / missing data / reasons / required repeat access

Urgent findings escalated to whom and when / reference to separate operating decision

Outstanding action register / responsible person / decision date

Attached reports / photographs / samples / calibration / data extracts

Owner review / acceptance of report / next inspection scope