JASO Service Lift Repair and Retrofit on 41 Wind Turbines in Finland and Latvia

Gridinta delivered JASO service lift repair, retrofit and ladder alignment across two wind-farm campaigns: 25 turbines in Finland and 16 in Latvia. The Finnish scope also included validation inspections. Together, the projects covered 41 operating turbines. The service lift repair and retrofit service is scoped for each lift and site.

Finland and Latvia work packages

Both campaigns were wind turbine access system repair and retrofit projects. The table lists what each campaign covered.

First published on 23 April 2026.

JASO service lift campaigns at a glance
CampaignCountryTurbinesScope
Project 1Finland25JASO elevator system repair, retrofit, ladder alignment and validation inspections
Project 2Latvia16JASO elevator system repair, retrofit and ladder alignment
TotalFinland and Latvia41Two separate wind farm campaigns inside operating turbine towers
Technician in a yellow helmet and harness on a railed platform at the top of a wind turbine, above fog, with another turbine in the distance
A technician on the tower-top platform above the cloud layer, during Gridinta’s JASO lift work.
Onshore wind turbines rising above morning fog over a forested wind farm
One of the wind farm settings in Gridinta’s JASO lift project.
Wind turbine tower and rotor seen from below at dusk, with red aviation lights
Tower and rotor from ground level at dusk, JASO lift project.
Technician in a harness working among cables and steel internals inside a wind turbine tower
Tower cabling and connectors beside a technician, with the fixed ladder behind, during Gridinta’s JASO lift work.

The Challenge

Inside a wind turbine tower, safe and reliable vertical access is not a minor detail. It directly affects technician movement, maintenance efficiency, and day-to-day operational safety.

In these two projects, the scope focused on JASO elevator systems and related ladder alignment works across a large number of turbines in two different countries. That meant the work had to be delivered consistently, turbine by turbine, while maintaining the same technical standard across all units.

This kind of campaign is not only about repairing individual components. It is also about making sure access systems function correctly as a whole. Elevator performance, retrofit requirements, ladder alignment, and validation inspections all have to come together to support safe long-term use inside the tower.

Scope of Work

Gridinta supported two separate wind farm campaigns involving JASO elevator system works.

In Finland, the project covered 25 wind turbines and included JASO elevator system repair, retrofit, ladder alignment, and validation inspections.

In Latvia, the project covered 16 wind turbines and included JASO elevator system repair, retrofit, and ladder alignment works.

Across both projects, the overall scope focused on restoring and improving tower access system condition so that turbines could continue to be serviced more safely and efficiently.

How Gridinta Approached the Work

These projects required a practical, repeatable approach. When the same type of technical scope is delivered across dozens of turbines, consistency matters just as much as the repair work itself.

Gridinta approached the campaigns with a field-focused mindset: assess the condition, complete the required repair or retrofit work, align the ladder system correctly, and verify that the access setup meets the expected standard for use.

That matters in real wind farm operations, because access systems are used constantly by technicians working inside the tower. If alignment is off, components are worn, or systems are not functioning as they should, maintenance becomes slower, harder, and less safe.

By combining repair, retrofit, alignment, and validation work into structured turbine-by-turbine campaigns, Gridinta helped bring the access systems closer to the condition needed for dependable ongoing operation.

Why This Project Matters

Access systems inside wind turbines do not always get much attention in public-facing project summaries, but they are critical in the real world.

A turbine can only be maintained efficiently if technicians can move through it safely and with confidence. That is why projects like these matter. They support the day-to-day reality of wind farm maintenance, where reliability is built not only through major component work, but also through the smaller systems technicians rely on every time they enter the tower.

These Finland and Latvia campaigns also show Gridinta’s ability to deliver repeatable technical work across multiple turbines and multiple markets. Completing aligned access-system scope across 41 wind turbines requires discipline, consistency, and strong execution standards, not just one-off repair capability.

The Outcome of Gridinta’s Services

Across two separate projects in Finland and Latvia, Gridinta delivered JASO elevator system repair, retrofit, ladder alignment, and inspection-related works across 41 wind turbines in total.

The result: the repair, retrofit and ladder-alignment work was completed on all 41 turbines, with validation inspections included in the Finnish campaign.

Related service lift resources

For a comparable enquiry, send the installed lift model, the examination findings or fault list, required modifications and number of turbines. Separate the repair work record from any statutory examination required before return to use. HSE explains why maintenance and thorough examination have different roles in Great Britain; other countries apply their own rules.

We scope similar service lift repair and retrofit work for other wind farms. For the statutory side, our service lift inspection guide explains who examines turbine lifts, how often, and which components are checked. Our table of service lift inspection intervals also compares the legal cycles by country.

Need wind turbine service lift repairs or retrofit work?

Gridinta supports wind farm projects with practical field expertise across tower access systems, maintenance works, repair campaigns, and inspection-driven upgrades. If your turbines require elevator system repair, retrofit work, ladder alignment, or broader technical support inside the tower, Gridinta is ready to help.

JASO Service Lift Repair and Retrofit: FAQ

What work does this JASO case study cover?
The campaigns combined JASO lift repair and retrofit with ladder alignment. Finland also included post-work validation inspections. These checks form part of the repair scope; a statutory examination is a separate responsibility under the rules for the country.
How did Gridinta approach the multi-turbine work?
Gridinta’s approach was to assess each access system, complete the required repair or retrofit work, align the ladder system, and verify the access setup for use.
Why was ladder alignment part of the scope?
Technicians rely on tower access systems to move through a turbine. Misalignment or worn components can make maintenance slower, harder, and less safe.
What was the outcome of the projects?
Gridinta completed the repair, retrofit and ladder-alignment work on all 41 turbines, with validation inspections in the Finnish campaign. For a similar project, we agree the records and acceptance checks with the client at the start.

Plan a service lift repair or retrofit campaign

Share the lift make and model, the number of turbines and the repair or retrofit scope with Gridinta to discuss the next step for your wind farm.
View service lift work